Nanomechanical properties evaluation of chromium nitride films by nanoindentation and nanowear techniquesLEE, Jyh-Wei; DUH, Jenq-Gong.Surface & coatings technology. 2004, Vol 188-89, pp 655-661, issn 0257-8972, 7 p.Conference Paper

Tribological studies of Zr-implanted PVD TiN coatings deposited on stainless steel substratesPURUSHOTHAM, K. P; WARD, Liam P; BRACK, Narelle et al.Wear. 2003, Vol 254, Num 7-8, pp 589-596, issn 0043-1648, 8 p.Article

Characterisation of engineered surfaces by a novel four-in-one tribological probe microscopeLIU, X; BELL, T; CHETWYND, D. G et al.Wear. 2003, Vol 255, Num 1, pp 385-394, issn 0043-1648, 10 p.Conference Paper

Nanoindentation and photoluminescence characterization of ZnO thin films and single crystalsZABELS, R; MULCTEPAVELA, F; GRIGORJEVA, L et al.Optical materials (Amsterdam). 2010, Vol 32, Num 8, pp 818-822, issn 0925-3467, 5 p.Conference Paper

Contribution of microstructural factors to hardness change during creep exposure in Mod.9Cr-1Mo steelSAWADA, Kota; MIYAHARA, Kensuke; KUSHIMA, Hideaki et al.ISIJ international. 2005, Vol 45, Num 12, pp 1934-1939, issn 0915-1559, 6 p.Article

Residual Stress, Nanohardness, and Microstructure Changes in Whirlwind Milling of GCr15 SteelQIN GUO; LI CHANG; LIN YE et al.Materials and manufacturing processes. 2013, Vol 28, Num 10-12, pp 1047-1052, issn 1042-6914, 6 p.Article

Revisiting the correlations between wet skid resistance and viscoelasticity of rubber composites via comparing carbon black and silica fillersWANG, Yuan-Xia; MA, Jian-Hua; ZHANG, Li-Qun et al.Polymer testing. 2011, Vol 30, Num 5, pp 557-562, issn 0142-9418, 6 p.Article

Properties of ZnO coatings obtained by mechanoactivated oxidationMUKTEPAVELA, F; BAKRADZE, G; GRIGORJEVA, L et al.Thin solid films. 2010, Vol 518, Num 4, pp 1263-1266, issn 0040-6090, 4 p.Conference Paper

Synthesis and mechanical properties of an amorphous Zr-Ni-Al-Cu alloyIQBAL, M; AKHTER, J. I; SUN, W. S et al.Journal of alloys and compounds. 2006, Vol 422, Num 1-2, pp 218-222, issn 0925-8388, 5 p.Article

Characterization of Functional States in Nicotine- and Cotinine-Imprinted Poly(4-vinylphenol) Films by NanoindentationRICHTER, Asta; BELBRUNO, Joseph J.Journal of applied polymer science. 2012, Vol 124, Num 4, pp 2798-2806, issn 0021-8995, 9 p.Article

Morphology and properties of nanotubular oxide layer on the Ti-13Zr-13Nb alloyOSSOWSKA, Agnieszka; SOBIESZCZYK, Sylwia; SUPERNAK, Milena et al.Surface & coatings technology. 2014, Vol 258, pp 1239-1248, issn 0257-8972, 10 p.Article

Nanoindentation study of ultrafine WC-10Go cemented carbideXIAOLIANG SHI; HUA YANG; GANGQIN SHAO et al.Materials characterization. 2008, Vol 59, Num 4, pp 374-379, issn 1044-5803, 6 p.Article

Molecular mechanics simulation on the nanoindentation on POSS nanocompositeFANLIN ZENG; YI SUN; YU ZHOU et al.Proceedings of SPIE, the International Society for Optical Engineering. 2008, Vol 6423, pp 642322.1-642322.6, issn 0277-786X, isbn 978-0-8194-6536-8 0-8194-6536-4, 3Conference Paper

Photoplastic effect in non-crystalline materials : a nanoindentation studyTRUNOV, M. L.Journal of physics. D, Applied physics (Print). 2008, Vol 41, Num 7, issn 0022-3727, 074011.1-074011.9Conference Paper

Nano and microhardness testing of aged EB PVD TBCsWELLMAN, R. G; TOURMENTE, H; IMPEY, S et al.Surface & coatings technology. 2004, Vol 188-89, pp 79-84, issn 0257-8972, 6 p.Conference Paper

Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zoneWAN, X. L; WEI, R; WU, K. M et al.Materials characterization. 2010, Vol 61, Num 7, pp 726-731, issn 1044-5803, 6 p.Article

Quantitative prediction of phase transformations in silicon during nanoindentationLIANGCHI ZHANG; BASAK, Animesh.Philosophical magazine letters. 2013, Vol 93, Num 7-9, pp 448-456, issn 0950-0839, 9 p.Article

Nanoindentation: Measuring methods and applicationsLUCCA, D. A; HERRMANN, K; KLOPFSTEIN, M. J et al.CIRP annals. 2010, Vol 59, Num 2, pp 803-819, issn 0007-8506, 17 p.Conference Paper

Nanoindentation: Unload-to-load work ratio analysis in amorphous carbon films for mechanical propertiesBARTALI, R; MICHELI, V; GOTTARDI, G et al.Surface & coatings technology. 2010, Vol 204, Num 12-13, pp 2073-2076, issn 0257-8972, 4 p.Conference Paper

Reversible plasticity under nanoindentation of atomically flat and stepped surfaces of fcc metalsZIEGENHAIN, Gerolf; URBASSEK, Herbert M.Philosophical magazine letters. 2009, Vol 89, Num 11, pp 717-723, issn 0950-0839, 7 p.Article

Synthesis of molybdenum silicide by both ion implantation and ion beam assisted depositionQINGLI MENG; JIZHONG ZHANG; ZHANPING LI et al.Applied surface science. 2008, Vol 254, Num 9, pp 2678-2684, issn 0169-4332, 7 p.Article

Modeling of recrystallization in cold rolled copper using inverse cellular automata and genetic algorithmsGHOSH, Sudipto; GABANE, Prashant; BOSE, Anindya et al.Computational materials science. 2009, Vol 45, Num 1, pp 96-103, issn 0927-0256, 8 p.Conference Paper

Mechanical properties of PECVD a-SiC:H thin films prepared from methyltrichlorosilaneIVASHCHENKO, V. I; DUB, S. N; PORADA, O. K et al.Surface & coatings technology. 2006, Vol 200, Num 22-23, pp 6533-6537, issn 0257-8972, 5 p.Conference Paper

Bilinear behavior in nano and microindentation tests of fcc polycrystalline materialsELMUSTAFA, A. A; ANANDA, A. A; ELMAHBOUB, W. M et al.Journal of engineering materials and technology. 2004, Vol 126, Num 4, pp 353-359, issn 0094-4289, 7 p.Article

Fast deposition of diamond-like carbon films by radio frequency hollow cathode methodXIAOLU PANG; HAILI PENG; HUISHENG YANG et al.Thin solid films. 2013, Vol 534, pp 226-230, issn 0040-6090, 5 p.Article